INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
NOMOR BAGIAN
SBRS-(3X)GM
Produk Dinding Ganda

3:1 shrink ratio High Sealing, Adhesive-Lined, Polyolefin Heat Shrink Tubing

SBRS-(3X)GM

High Sealing, Adhesive-Lined, Polyolefin Heat Shrink Tubing

It consists of a double layer of cross-linked polyolefin and polyamide PA. It has the characteristics of good flame retardancy and strong sealing, and is mainly used in various fields such as sealing, insulation, bundling, and fixation of wire harnesses and metal pipes that require sealing, waterproof, moisture-proof, and anti-corrosion.

It consists of a double layer of cross-linked polyolefin and polyamide PA. It has the characteristics of good flame retardancy and strong sealing, and is mainly used in various fields such as sealing, insulation, bundling, and fixation of wire harnesses and metal pipes that require sealing, waterproof, moisture-proof, and anti-corrosion.

10   SBRS-(3X) H.png


Features

● 3:1 shrink ratio to cover varying splice configurations and substrate profiles.

● Flame-retardant and strong sealing, the tubing provides strain relief and abrasion protection of wire 

   splices, terminals, and other components.

● Thick adhesive liner forms an effective barrier against fluids and moisture penetration.

● Minimum shrink temperature: 70°C .

● Continuous operating temperature: -45°C to 125°C .

● Fully shrink temperature:125℃.

● Wear resistance and UV resistance.

Technical Data

PropertyTest MethodStandard
Tensile Strength(MPa)ASTM D2671≥10.4
Elongation(%)ASTM D2671≥200
Tensile Strength after aging (MPa)ASTM D 2671(158℃×168h)≥7.3
Elongation after aging(%)ASTM D 2671(158℃×168h)​≥100
Dieletric strength(kV/mm)IEC 60243≥15
Volume resistivity(Ω.cm)ASTM D876≥1X1014

Adhesive

PropertyTest MethodStandard
Water AbsorptionASTM D570<0.2%
Sofening Point (℃) ASTM E2895±5
Strength of peeling(PE) ASTM D 1000120N/25mm
Strength of peeling(AL)ASTM D 100080N/25mm


Specification Table

Dimensions

SizeExpandedAfter Recovery
mm

Inner Diameter

Min(mm)

Inner Diameter

Max(mm)

Total Wall 

Thickness(mm)

Adhesive 

Thickness(mm)

Φ3.2

3.2

1.00

0.90±0.30

0.45±0.20

Φ4.8

4.8

1.60

1.20±0.30

0.65±0.30

Φ6.4

6.4

2.20

1.45±0.30

0.75±0.30

Φ7.9

7.9

2.70

1.55±0.30

0.80±0.30

Φ9.5

9.5

3.20

1.65±0.30

0.80±0.30

Φ12.7

12.7

4.20

1.70±0.30

0.80±0.30

Φ15.0

15.0

5.20

2.00±0.30

1.00±0.30

​Φ19.1

19.1

6.30

2.10±0.30

1.00±0.30

Φ25.425.48.502.20±0.401.00±0.30


Pemberitahuan: INERGEK berhak melakukan modifikasi yang dianggap perlu.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957
INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
NOMOR BAGIAN
SBRS-(3X)GM
Pemberitahuan: INERGEK berhak melakukan modifikasi yang dianggap perlu.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957