
● 2:1 shrink ratio
● Flame retardant
● Good resistance to common fluids and solvents
● UL approved
● Continuous operating temperature:-55℃~150℃
● Fully shrink temperature:≥135℃
● RoHS compliant
| Property | Test Method | Typical Performance |
|---|---|---|
| Tensile strength(MPa) | ASTM D2671 | ≥10.4 |
| Ultimate elongation(%) | ASTM D2671 | ≥200 |
| Tensile strength after heat aged (Mpa) | 180℃X168h | ≥7.3 |
| Ultimate elongation after heat aged(%) | 180℃X168h | ≥100 |
| Corrosion | UL 224 | Pass |
| Flammability | ASTM D 2671C method | VW-1 |
| Voltage withstand | 2500V, 60s | No breakdown |
| Heat shock | 250℃X4h | No cracks, flowing or dripping |
| Cold blend | -30℃X1h | No cracks |
| Dielectric strength(kv/mm) | ASTM D149 | ≥15 |
| Volume resistivity (Ω·cm) | ASTM D876 | ≥1014 |
| Water absorption(%) | ASTM D570 |
≤0.5 |
| Size | As Supplied | After Recovery | Standard Package | ||
|---|---|---|---|---|---|
| Inch | mm | Inner Diameter mm | Inner Diameter mm | Wall Thickness mm | Spool Length M/spool |
| 3/64 | 1.0 | ≥1.20 | ≤0.6 | 0.41±0.10 | 200 |
| 1/16 | 1.5 | ≥1.60 | ≤0.8 | 0.43±0.10 | 200 |
| 3/32 | 2.5 | ≥2.40 | ≤1.2 | 0.51±0.10 | 200 |
| 1/8 | 3.0 | ≥3.20 | ≤1.6 | 0.51±0.10 | 200 |
| 3/16 | 4.5 | ≥4.80 | ≤2.4 | 0.51±0.10 | 100 |
| 1/4 | 6.0 | ≥6.40 | ≤3.2 | 0.64±0.10 | 100 |
| 3/8 | 9.0 | ≥9.50 | ≤4.8 | 0.64±0.10 | 100 |
| 1/2 | 12.0 | ≥12.70 | ≤6.4 | 0.64±0.10 | 100 |
| 3/4 | 18.0 | ≥19.10 | ≤9.5 | 0.76±0.15 | 100 |
| 1 | 25.0 | ≥25.40 | ≤12.7 | 0.89±0.15 | 50 |
| 5/4 | 32.0 | ≥32.00 | ≤15.9 | 0.89±0.15 | 50 |
| 3/2 | 38.0 | ≥38.00 | ≤19.1 | 1.00±0.15 | 50 |
| 2 | 50.0 | ≥51.00 | ≤25.4 | 1.15±0.15 | 25 |
| 3 | 75.0 | ≥76.00 | ≤38.1 | 1.27±0.20 | 25 |
| 4 | 100.0 | ≥102.00 | ≤50.8 | 1.40±0.20 | 25 |
| 5 | 120.0 | ≥125.00 | ≤63.5 | 1.40±0.25 | 25 |